Dual Vacuum+

You asked. We listened. 

• More powerful suction
• Multifunctional 
• Quadruple filtration
• Superior photon UV-C technology that eliminates viruses and bed allergens

The GOLD standard in UV-C vacuums.

1. Cordless, bagless and rechargeable handheld vacuum
2. Cyclonic dust collection system
3. Dual Power suction- Low or High

4. Suction Power: 6 kPa (Low Speed), 12 kPa (High Speed)
5. Quadruple High Efficiency Filtration: Medical-grade, high-efficiency HEPA Filter, Non-Woven Filter, Powerful UV-C           Lamp
NOTE: Filter/s are not washable
6. Motion sensor switch to prevent exposure to UV-C light
7. Pulse Vibration
8. Run Time: 12 Mins (Low Speed), 30 Minutes (High Speed)
9. Charging Time: 3-5 Hours
10. Rated Power: 100 W
11. Rated Voltage: 11.1 V
12. Dust Cup Capacity: 0.2L
13. Product Dimensions: L- 27.8 cm x W- 20 cm x H-18.7 cm
14. Product Weight: 1.10 kg
15. With 1 year Local Supplier Warranty, 3 months for the bulb

Before Use: 

• Ensure that all components of the Dual Vacuum + have been properly assembled. 

• Check if the unit has been fully charged or has enough power 

How to Charge

• Insert the charging cable into the USB adapter port and the other end to the unit’s charging. Please use a 5V, 2A USB     adapter to charge. 

• Power Indicator is flashing in white= Unit is charging 

• Power indicator has stopped flashing (Steady White Light)= Unit is fully charged 

• Initial charging time (Full Charge) is five (5) hours; succeeding charging time is three (3) to five (5) hours

   Do not turn on the power or use the unit when charging.

How to Use

• Press the “ON/OFF” button to start

• Press the “SPEED” button to set desired speed

     White- Normal      

      Orange- High

*Note: Upon turning on the unit, speed starts off at normal speed (White)

  Start vacuuming

Press the “ON/OFF” button to turn the unit off

How to Use the UV-C Base

• This unit is equipped with a two-wheel safety switch. The UV-C Lamp and Pulsating Pads will automatically shut off       when the unit is lifted from the surface or switched upwards. 

• To activate the UV-C lamp and Pulsating pads, make sure that the vacuum is placed firmly flat on the surface 

•The UV-C indicator on top the unit will light up indicating that the UV-C lamp is turned on. This eliminates the need to    lift the unit to check if the lamp is working. 

Additional Notes:

Make sure to fully charge the unit first before first use or when using the unit after being in storage for a long time

Please fully charge the unit before keeping it in storage for a long time.

How to Charge

• Insert the charging cable into the USB adapter port and the other end to the unit’s charging port. Please use a 5V, 2A USB        adapter to charge. 

* USB Adapter not included

• Power Indicator is flashing in white= Unit is charging 
• Power indicator has stopped flashing (Steady White Light)= Unit is fully charged 

• Initial charging time (Full Charge) is five (5) hours; succeeding charging time is three (3) to five (5) hours
• Do not turn on the power or use the unit when charging.

1. There is an overheat protector inside the motor. When the temperature goes up too high, it will automatically shut           down to protect the motor and machine. You must rest the machine for about half an hour to restart again.
2. Avoid touching the UV lamp with your fingers because the stain will affect the sterilization.
3. Regularly clean the HEPA filter and contact your authorized dealer for filter replacement.
4. Please do not open or disassemble the machine as this will void your warranty.

1. Ultraviolet radiation does not cause skin cancer or cataract, but it may irritate eyes and skin. Never stare directly and         never expose your skin to the UV-C Light.
2. Please use a soft, dry cloth to clean the machine.
3. Never use sharp objects to scrape of the dust around it.